The PhoCheck Tiger by IonScience is a (PID) Photo Ionisation Detector for VOC’s (Volatile Organic Compounds).
There are 3 models in the range. All are upgradable from the basic variant.
This hand held VOC detector has MiniPID technology providing the best available detection and software features, and is all ready to use straight out of the box!
Tough, reliability and accuracy make the PhoCheck Tiger an easy choice for VOC measurement. Incorporating patented fence electrode technology to ensure successful operation the PhoCheck Tiger gives you reliability previously unavailable, no need for temperature and humidity compensation using this technology.
PhoCheck Tiger Firmware and Software updates (August 2011)
Typical Gases Detected Include:
PhoCheck Tiger is a fully upgradeable instrument with multiple application driven software modules to choose from. A base unit can be upgraded with data logging, health and safety mode and ppb options remotely, from the users own desktop without even being returned to the factory.
Data Logging:
Add data logging to your instrument for the following features:
• Store up to 120,000 data points with date and time stamp
• Event logging
• Push to log (single point)
• Timed logging
• Continuous logging
• Log on alarm
• Zone logging
Health and Safety Mode:
Add Health and Safety mode to include:
• Time Weighted Average and Short Term Exposure Limit alarms using preset tables
• Selectable national standards NIOSH, OSHA and EH40 ppb Capability
• Detect VOCs from 1 ppb to 20,000 ppm
(Note: a base unit detects VOCs from 0.1 ppm to 20,000 ppm).
Bluetooth and Wireless Communication
• Future Bluetooth and Wireless communication options will be available.
Minimum Resolution*
1 ppb or 0.001 mg/m3
Maximum Reading**
20,000 ppm or 20,000 mg/m3
Accuracy*
± 5% display reading ± one digit
Linearity*
± 5% to 100 ppm
Intrinsically Safe Approvals
ATEX II 2G Ex ia IIC T4 (- 15 0C ≤Ta ≤+60 0C), IECEx and CUL
Battery Life
Li-ion: life up to 30 hours, charge time 6.5 hours
Alkaline: 3 x AA, typically 15 hours life
Lamps
10.6 eV Krypton PID lamp (standard) 9.8eV and 11.7eV lamps available
Data Logging*
> 120,000 data log points including date and time stamp (33 hours at 1 log per second)
Communication
USB 1.1
Calibration
Via calibration kit accessory
Alarm
Flashing LED and 95 dBA at 300mm (12”) audible sounder
Selectable vibrating alarm
Pre-programmed TWA and STEL*
Pre-programmed with 450 gases*
Flow Rate
220 ml/min with flow fail alarm
Temperature
Operating: -20 to 60 0C, -4 to 140 0F (non Intrinsically Safe)
Humidity: 0-99% RH (non condensing)
Protection
Designed to IP65 (heavy rain)
C E 1180
EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A
Weight & Dimensions
Instrument without probe: Width: 340 x Height: 90 x Depth: 60 mm (13.4 x 3.6 x 2.4”)
Standard case: 420 x 320 x 97 mm (16.5 x 12.5 x 3.8”)
Instrument weight 0.72 kg (25 oz)