Call 01367 899553
Tiger Select : Benzene & Total Aromatic Compound Monitor
Product Information
Products
The Tiger Select is revolutionary hand-held gas detector by IonScience.
The Tiger has a two mode operation for the rapid detection benzene and Total Aromatic Compounds (TACs) which provides you with accurate and reliable data you can count on.
Utilising the high output Ion Science 10.0eV detection system, a reading for Total Aromatic Compounds (TACs) is seen immediately on start-up. Should aromatics be detected, a benzene pre-filter tube can be easily attached to ensure rapid detection and selective measurement of benzene.
The Tiger Select displays real time data, ensuring the final reading represents the full value of actual benzene present and are displayed down to ppb levels.
Tiger Select is capable of providing 15 minute STELs and 8 hour TWAs for TACs. A 10.6 eV lamp can easily be installed for the detection of a wide range of TVOCs.
In addition, the unique MiniPID VOC sensor incorporates both Anti-contamination technology and Fence Electrode technology for extended operation in difficult working environments.
Tiger Select can also be used in standard Tiger operational mode without the use of a benzene pre-filter tube to deliver active indications of VOCs, including benzene at concentrations as low as 1 ppb benzene equivalent.
Applications for Tiger Select include; TAC detection at
loading docks and barge operations, confined space entry
pre-screening during refinery and plant maintenance, refinery
down-stream monitoring, hazardous material and marine spill
response.
The effects of Benzene and the Exposure Limits
Product features
-
Immediate results on start up - no need to wait for readings
-
Fast to detect Total Aromatic Compounds (TACs)Detects benzene in other compounds with selective Draeger Benzene pre filter tubeAlso detects benzene without the need for a specific tube in areas of benzene gas onlyDetects down to ppb levelsContinuous readings shown on display until max level is reachedIndependently verified as best performing PID technologyExceptionally easy-to-use and intuitive softwareLarge, clear backlit display and keypadEasy to operate even when wearing thick glovesLightweight enabling easy one-handed operationRugged design to withstand the harshest environmentsBacklight responds to ambient light conditionsBattery life up to 30 hours
Technical Specifications
Resolution
10 ppb or 0.033 mg/m3 benzene
Maximum Reading
40 ppm or 130 mg/m3 benzene in tube mode
At least 4000 ppm in TAC mode
Accuracy
±10% display reading ± one digit benzene
Linearity
± 5% to 40 ppm benzene
Response Time
120 seconds. Progressive indication of benzene breakthrough is displayed in real time
Intrinsically Safe Approvals
II 2G Ex ia IIC T4 (- 15 0C ≤Ta ≤+60 0C)
ITS09 ATEX 26890X
IECEx ITS 10.0036X
US and Canadian approvals pending
Battery Life
Li-ion: life up to 30 hours, charge time 6.5 hours
Alkaline: 3 x AA, typically 15 hours life
PID Lamps
Kr PID lamp with 10.0 eV filter pellet
Data Logging
> 120,000 data log points including date and time stamp
Communication
Direct USB 1.1
Calibration
2 and 3 point calibration (Via calibration kit accessory?
Alarm
Flashing LED’s Amber (low alarm) Red (high alarm)
Sounder 95 dBA at 300mm (12”) Vibration on alarm
Pre-programmed TWA and STEL*
Flow Rate
220 ml/min (150 cc/min flow alarm)
Temperature
Operating: -20 to 60 0C, -4 to 140 0F (non Intrinsically Safe)
Humidity: 0-99% RH (non condensing)
Protection
Designed to IP65 (heavy rain)
1180
EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A
Weight & Dimensions
Instrument (probe fitted, no tube attached)
Length: 465 x Height: 89 x Depth: 61 mm (18.3 x 3.5 x 2.4”)
Standard case
Packed weight: 5 kg (176 oz
Related Products
|
PhoCheck + PID/VOC Series - Portable Gas leak Detectors
 |
The PhoCheck Tiger PID - Photo Ionisation detector
 |