QRAE Plusis a full-featured, compact, one-to-four sensor confined space gas monitor.
New features include easy-to-change, externally accessed battery packs, (available in both alkaline and rechargeable versions), and an even more water resistant case design.
The rechargeable, lithium-ion battery pack provides up to 20-hours of continuous operation.
|
Size |
4.5" x 3" x 1.8" (11.5 cm x 7.6 cm x 4.6 cm) |
|
Weight |
15 oz. (425 g) |
|
Sensors |
Combustible: Protected dual-mode catalytic bead for 0 ~100% LEL Oxygen: Electrochemical fuel-cell Toxic: Interchangeable electrochemical for CO, H2S, SO2, NO, NO2, CL2, HCN, NH3, and PH3 |
|
Battery |
Interchangeable Li-Ion and alkaline battery packs. Fitted with rechargeable lithium-ion battery pack with internal smart charging, 120V AC/DC wall adapter, and spare alkaline battery adaptor |
|
Operating hours |
Up to 20-hours of continuous (typical) operation with lithium-ion battery pack |
|
Display |
2-line, 16-digit LCD with LED back-light, automatic activation in dim-light or alarm condition. |
|
Keypad |
1 operation key and 2 programming keys |
|
Attachments |
Durable, rubber boot with belt clip and wrist strap |
|
Temperature |
- 4 to 113°F (- 20 to 45°C) |
|
Humidity |
0% to 95% relative humidity (non-condensing) |
|
Direct readout (instantaneous up to 4 values) |
Instantaneous readings for up to four sensors: • Oxygen as percentage by volume • Combustible: LEL range as percent of LEL • Combustible: Thermal conductivity mode as percent volume • Toxic gases as parts-per-million by volume • High and low values for all gases • STEL and TWA values of toxic gases • Battery and shut down voltage • Date, time, elapsed time, temperature |
|
Alarms |
95 dB buzzer and flashing red LED to indicate exceeded preset limits: • High: 3 beeps and flashes per second • Low: 2 beeps and flashes per second • STEL and TWA: 1 beep and flash per second • Alarms latching with manual override or automatic reset • Additional diagnostic alarm and display message for low battery and pump stall |
|
Intrinsic Safety |
UL® Classified as Intrinsically Safe for use in Class 1, Division1, Groups A, B, C, & D, and Class 2 Groups E, F, G Hazardous Locations, and European Community (ATEX) Eex ia d IIC T4/T3 |
|
Calibration |
Two-point field calibration for zero and span, optional three point calibration for oxygen |
|
Datalogging |
16,000 datalogging points downloadable to PC with serial number of unit, user ID, date, time, site number, calibration and readings |
|
Sampling pump |
Optional, internal pump with user selectable flow-rate: Low— 200cc/min, High — 300cc/min |
|
PHD6 Confined Space MultiGas Detector
 |
MultiPro - Multigas Monitor
 |
|
QRAE II
 |