Customer Support:01367 899553 firstname.lastname@example.org
Product Code: 9519-4000
Quantifit Respirator Fit Tester
Exclusively available from Shawcity in the UK, this is the industry breakthrough in mask-fit technology.
The fastest fit-tester available, it utilises simple air and controlled negative pressure to directly measure respirator leakage and unlike other technologies does not require consumables such as alcohol solutions, wicks and probes. It can also be used in any environment - indoor/outdoor, clean/dirty - as long as air is present, so no longer any need for lighted candles, blowing salt fog or filtration systems.
During a fit test, the respirator inlets are capped with test adapters, and the inhalation valves are propped open or removed from the mask. With the test subject holding their breath for no more than ten seconds, the Quantifit then establishes and maintains a slight vacuum, or controlled negative pressure, inside the mask.
Since the respirator inlets are sealed, all sources of leakage into the mask are through the face-to-facepiece seal or due to integrity issues. The volume of air drawn out of the mask by the Quantifit during this short period of time is equal to the leak rate into the mask through the face-to-facepiece seal.
Easy-to-use, simple operation means many users can self-test once trained. A fast and easy fit method with very quiet operational noise. Fit is measured by simulating movements approximating real life.
Fit testing for: Quantitative respirator (QNFT), half masks, full-face, gas mask, PAPR and SCBA.
Technical Documents for the Quantifit.
These articles will help you with any technical issues or problems you may be experiencing with testing. You can, of course, contact our technical team who will be able to assist further, call 01367 889553.
Select a variation from the product list
Shawcity offer technical support on all products.
If you sign up to receive our newsletter, Shawcity will only use your name and email address for the purpose of sending you news and product updates via email. Your data will be kept indefinitely for this purpose but we will never sell or share your details with any other party. If you change your mind you can stop receiving our communications at any time, by clicking on 'Unsubscribe' within our emails or by contacting: email@example.com.
ATEX is the name commonly given to the two European Directives for controlling explosive atmospheres.
ATEX certification ensures that equipment is fit for use within explosive atmospheres and is supplied with adequate information to ensure it can be used safely.
For more information visit: hse.gov.uk/fireandexplosion/atex.htm